по товарам

Efficient Multi-Channel Digital Input Ethernet Remote Acquisition Module M410T в Шэньчжэнь

Номер объявления: 35733132
не обновлялась более 6 месяцев
Efficient Multi-Channel Digital Input Ethernet Remote Acquisition Module M410T в Шэньчжэнь
Под заказ
Опт и розница
от 1 листа:
11100,7 руб. / 120 $
  • Описание
  • Доставка и оплата

Компания King Pigeon предлагает купить товар Efficient Multi-Channel Digital Input Ethernet Remote Acquisition Module M410T в Шэньчжэнь по цене 120.00 долл. США. Для покупки товара Efficient Multi-Channel Digital Input Ethernet Remote Acquisition Module M410T вы можете воспользоваться формой обратной связи, позвонить менеджеру компании, либо заказать обратный звонок с сайта.

Efficient Multi-Channel Digital Input Ethernet Remote Acquisition Module M410T 

Specifications

Ethernet Remote I/O Module Specifications

• Digital Input

Sensor Type

Wet Contact (NPN or PNP), Dry Contact

I/O Mode

DI or Event Counter

Dry Contact

• On: short to GND=0
• Off: open=1

Wet Contact (DI to COM)

• On: 10 to 30 VDC =1
• Off: 0 to 3 VDC=0

Counter Frequency

700khz(Only the 1st Channel can be used as high speed pulse counter)

Digital sampling frequency

500Hz

Digital filtering strategy

Continues 3 times

Isolation

Optical Isolated,3k VDC or 2k Vrms

• Digital Output

Type

Sink

I/O Mode

DO 

Pulse Output Frequency

10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)

Over-Voltage Protection

50 VDC

Over-Temperature Shutdown

175°C (typical), 150°C (min.)

Load Current

 Max. 500 mA per channel

Digital sampling frequency

500Hz

• Analog Input

Type

Differential input

Resolution

12 bits

I/O Mode

Voltage / Current (jumper selectable)

Input Range

0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA

Accuracy

±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C

Sampling frequency

20Hz

Isolation

Electrical isolation

• Working Power Requirements

Input Voltage

12 to 36 VDC, Peak Voltage:+40VDC, Power consumption: Less than 3W;

Input Current

139 mA @ 24 VDC

• Power Output

Output Voltage

12 to 36 VDC

Output Current

139 mA @ 24 VDC

• LAN

Ethernet

10/100 Mbps, RJ45 ports

Protection

15KV ESD Protection

Protocols

Modbus TCP, TCP/IP,TCP Server,TCP Client 

Max. TCP Connection

5

• Serial Port

RS485

MODBUS- RTU Protocol, Modbus-ASCII Protocol, Modbus Master or slave.

Protection

15KV ESD Protection

Modbus Slave address

1~255

Baud Rate

1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;

Mapping registers

Bit Type: 300 Registers, 16-Bit Type: 300 Registers.

• Physical Characteristics

Wiring

I/O cable max. 14 AWG

Dimensions

105 x 88 x 30 mm

Weight

Under 205 g

Mounting

DIN rail or wall

• Environmental Limits

Operating Temperature

Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

Altitude

Up to 3000 m

The 16CH Digtial Input Module M410 Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

The 16CH Digtial Input Module M410 Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements.

The 16CH Digtial Input Module M410 Ethernet Remote I/O module provides 16 optical-isolated digital inputs, supports max. 700KHz high speed pulse counter. All of the I/O with high sampling frequency and special filtering strategy to ensure it’s reliable.

Detail

MXXXT.jpg

Features:

1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog;
2. Wide range power supply 12 ~ 36VDC with over voltage and phase-reversal protection;
3. Management and configuration via LAN connection configuration software for easy operation and maintenance;
4. Integrated 1-2 10/100M adaptive Ethernet module, supports Modbus TCP protocol;
5. 4 RTD input, supports PT100 and PT1000 resistance sensor, compatible 2 or 3 wires;
6. High sampling frequency and special filtering strategy to ensure reliability;
7. 1 RS485 Serial port, supports Modbus RTU/ASCII Master, can extend I/O modules;
8. Supports register mapping function and extend I/O inquiry strategy;
9.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost;
10.LED instructions work status, with reset button to reset, easy on-site installation and commissioning;
11.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field;
12.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.

Typically applications:

1.      BTS Monitoring;

2.      Security Alarm System applications;          

3.      Supervision and monitoring alarm systems;

4.      Automatic monitoring system;             

5.      Vending Machines security protection;

6.      Pumping Stations, Tanks, Oil or Water levels;

7.      Buildings and Real Estate;

8.      Weather Stations; 

9.      River Monitoring and Flood Control;

10.   Oil and gas pipelines;  

11.   Corrosion protection

12.   Temperatures, water leakage applications;

13.   Wellheads, boat, vehicle;

14.   Energy saving, street lights control system;

15.   Valve controls;

16.   Transformer stations;   

17.   Unmanned machine rooms;

18.   Control room application;

19.   Automation System, M2M;

20.   Access Control System;

21.  PLC Gateway, PLC Remote Monitoring.

Посмотреть Efficient Multi-Channel Digital Input Ethernet Remote Acquisition Module M410T на сайте поставщика

Наличие:
Под заказ
Опт/розница:
Опт и розница
Способ доставки:
Самовывоз, Доставка продавцом, Доставка транспортной компанией, Доставка почтой, Курьер
Способ оплаты:
Электронные деньги, Безналичный расчет, Предоплата, без НДС, с НДС

Контакты поставщика

Шэньчжэнь
+8 показать телефон
Cмотреть на большой карте
Пожаловаться на информацию

Похожие предложения поставщика

  • The Cellular 4G Lte Industrial IoT Edge Router R10 is not only an industrial-grade router, but also supports programmable logic control, customized applications, and replaces PLC. Used as Modbus RTU...
    от 1 листа:
    11100,7 руб. / 120 $
     
  • Industrial IoT Gateway BL110 used to convert Modbus, Modbus TCP, DLT645, PLC, BACnet MS/TP, BACnet/IP and other industrial protocols to MQTT, OPC UA, BACnet/IP, Modbus TCP and other protocols.
    от 1 шт.:
    18501,16 руб. / 200 $
     
  • Modbus MQTT Ethernet Remote I/O Module M160T/E is an industrial class, isolated designed, high reliability, high stability, and high precision data acquisition module, embedded 32-Bit High-Performance...
    от 1 шт.:
    12025,75 руб. / 130 $
     
  • R10 is not only an industrial-grade router, but also supports programmable logic control, customized applications, and replaces PLC. Used as Modbus RTU/TCP Master to collect data, convert Modbus to...
    от 1 листа:
    11100,7 руб. / 120 $
     
, Шэньчжэнь,
наверх
Отправить заявку всем
Пожалуйста, сообщите продавцу что узнали контакты на портале FIS.ru